Quick answer: Aluminium kitchen cabinets in Singapore start from S$280 per foot run at Design Profession. MDF or plywood carpentry typically costs around S$100 to S$160 per foot run, but aluminium is waterproof and termite-proof, so it does not swell, rot or need early replacement. A typical HDB kitchen lands between S$3,000 and S$7,500 depending on size and finish.
Price Per Foot Run by Cabinet Material
Singapore kitchen carpentry is priced per foot run (pfr), meaning the length of cabinet along the wall. Here is how the main materials compare.
| Cabinet material | Typical price per foot run | Water and termite resistance |
|---|---|---|
| MDF / chipboard carpentry | approx. S$100 – S$130 | Low: swells and rots when wet |
| Plywood with laminate | approx. S$120 – S$160 | Medium: edges wear down with humidity |
| Aluminium (Design Profession) | From S$280 | High: waterproof and termite-proof |
MDF and plywood figures are indicative market ranges and vary by supplier and specification.
Estimated Project Price by Kitchen Type
Your total depends on kitchen length, layout, door finish and hardware. These are our typical project ranges for fully fitted aluminium kitchens:
| Kitchen type | Typical size | Estimated price range |
|---|---|---|
| HDB 3-room kitchen | 6 – 8 ft run | S$3,000 – S$4,800 |
| HDB 4/5-room kitchen | 8 – 12 ft run | S$4,800 – S$7,500 |
| Condo kitchen | 10 – 14 ft run | S$6,000 – S$9,500 |
| Landed / large kitchen | 14 ft run and above | S$9,500 and up |
S$280 per foot run is our starting rate. Final project totals reflect door finish, hardware, wall cabinets and layout complexity, which is why we always provide a free itemised quote before any work begins.
What Affects the Price of an Aluminium Kitchen Cabinet?
- Kitchen length: the main driver, measured in feet run for base and wall cabinets.
- Carcass construction: honeycomb-reinforced, welded panels cost more than hollow aluminium frames but are far stronger. See our guide to honeycomb aluminium cabinets.
- Door finish: wood-grain, matte laminate and solid colours are priced differently.
- Hardware: soft-close hinges, drawer runners, pull-out baskets and corner solutions.
- Layout: L-shaped and U-shaped kitchens need more corner work than a straight run.
- Countertop and appliances: usually quoted separately from the cabinets.
How to Read an Aluminium Cabinet Quote
Two quotes that look similar can describe very different cabinets. Ask each supplier to state:
- Whether the panels are honeycomb-reinforced or hollow aluminium.
- Whether joints are welded or only screwed and clipped.
- The hardware brand and type (hinges, runners).
- Whether the countertop, delivery and installation are included.
- The warranty terms in writing.
Is Aluminium Worth the Higher Price?
Aluminium costs more upfront than MDF or plywood. In Singapore’s humid climate, wood-based cabinets are exposed to moisture around the sink, steam from the hob and occasional leaks, which can lead to swelling, bubbling laminate and repairs. Aluminium contains no organic material that can absorb water or feed termites, so the cabinet keeps its shape. For homeowners planning to stay in the home for many years, that often outweighs the extra cost. Read the full aluminium vs plywood comparison and the honest disadvantages of aluminium kitchen cabinets before you decide.
See also: What a good aluminium carcass looks like before you compare quotes.
Also see: finishes and colours, how to choose a supplier and FAQs.
Frequently Asked Questions
Our aluminium kitchen cabinets start from S$280 per foot run. MDF or plywood carpentry typically costs around S$100 to S$160 per foot run, but is vulnerable to moisture and termites.
A fully fitted aluminium kitchen for an HDB 3-room flat typically costs S$3,000 to S$4,800, and S$4,800 to S$7,500 for a 4 or 5-room flat, depending on size, finish and hardware.
Aluminium cabinets use honeycomb-reinforced, welded panels that are fabricated precisely off-site. They do not swell, rot or attract termites, so you avoid the repair and replacement costs common with wood.
Yes. We provide a free, no-obligation consultation and an itemised quote before any work begins.
Countertops are usually quoted separately from the cabinets. Your itemised quote shows exactly what is included.